88问答网
所有问题
复制模具用英语怎么说
如题所述
举报该问题
推荐答案 2018-01-16
ä½ å¥½ï¼
å¤å¶æ¨¡å ·
Duplicating mold
温馨提示:答案为网友推荐,仅供参考
当前网址:
http://88.wendadaohang.com/zd/MVS1gM111ga11tVgagc.html
相似回答
请教
模具英语
翻译是什么
答:
mould
如:mould design 模具设计
injection mould
注塑模具
“
模具
”
用英语怎么说
?
答:
mold; mould; die; tooling;matrix; pattern
模具英语
咋读
答:
Mould, shovel machine, set piece, line bits, thimble, inclined top, mould kernel, mold, slab, the panel, shuikou board, garbage nail, thimble board, do a seat, inclined top seat, spring, back needle, side lock, ejector
模具英语
翻译
答:
模具
块是由动模和静模组成。6.Ejector half must have a minimum of eight ejector pins on each cavity 动模需要有最少八个顶出销(杆)。对应每一个型腔。7.Ejector pins are to have interchangeable sleeves for maximum tool life 顶出销需要有可交换的套子(?这个词不太懂),为了最大的工具...
模具英语
翻译,请各位模具高手帮忙翻译一下
答:
2, open mold, then water, trip switch, check the top of the reset 3, mold, injection, cooling 4, before the mold core pulling out of the fuel tank 5, open mold, the top out pickup 6, Die 7, the fuel tank before the reset mode 8, the 50-60mm mode, the motor ...
英语翻译
模具英语
翻译
答:
1.Familiar mold design cycle, with common mold structure. Can operate the milling machine, the grinder, the radial drill drilling machine independently. The spark machine, line cutting can the simple operation. Understood that mold for plastics structure and the technical process, can ...
模具英语
翻译
答:
2. Lower die cost. Knockouts are generally of lower cost than spring strippers. 较低
的模具
消耗。总体来说,顶出要比弹簧脱模机成本少。3. Positive action. Knockouts do not stick as spring strippers occasionally do. 正确的方式。弹簧脱模机通常会有粘合现象,顶出则不会。4. Lower ...
模具英语
答:
‘undercut’是一个单词。在焊接上称为‘咬边’,在伐木方面这个词系指砍树时现在树的根部侧面砍出一个契口,以便从树的另一边将树推倒,与此相同的词有:kerf、dip等。根据这几个词的汇总理解,在你
的模具
我方面建议译为侧边凹槽/侧凹槽。不一定合适,请参考。
大家正在搜
模具倒扣英语怎么说
复制英语怎么说
模具英文怎么说
回答用英语怎么说
比例用英语怎么说
膨胀用英语怎么说
毫无疑问用英语怎么说
你多大了用英语怎么说
布用英语怎么说
相关问题
做样品的模具和做大货的模具,用英语分别该怎么说啊
开模具的英文怎么说
模具课 用英语怎么说
模具出数用英语怎么说???
模具课 用英语怎么说
求助“模具”方面术语的英文翻译!
“面具”用英语怎么说?
求助模具英语翻译