Running the SETUP Program
Run the SETUP.EXE program from the provided installation CD. This
program is located in the alpha-SE directory on the CD. Setup will
install the alpha-SE program files, the Java Virtual Machine (VM) files
which are required to run alpha-SE, and other related files (material
optical constants files, optical model files, example files, etc.). The
SETUP program also installs the calibration and configuration files for
your specific instrument from the “CNF” directory on the CD.
Follow the onscreen prompts provided by the SETUP program. The
default directory for the installation is in the C:\alpha-SE directory. To
minimize compatibility problems, it is highly recommended to install the
alpha-SE software in this directory. A short-cut icon (Fig. 2-7) will be
placed on the Windows Desktop which can start the alpha-SE program.
DO NOT start the
alpha-SE program at
this time.
Figure 2-7. alpha-SE icon.
Connecting the alpha-SE
Connect the vacuum hose, power and USB connections to the back of the
alpha-SE as shown in Fig. 2-8. Also, connect the vacuum hose to the
vacuum pump, the power cable to outlet, and the other end of the USB
cord to the computer. The vacuum pump will need to be turned on
before mounting samples.
Turn on the power to the alpha-SE unit by pressing the green power
switch. If the switch does not “light up”, check the power connections.
Figure 2-8. Connect vacuum, power and USB connections.
Installing the alpha-SE USB Drivers
When the alpha-SE unit is connected to the computer with the USB
cable, Windows will automatically detect that new hardware has been
attached to the computer. On some Microsoft operating systems (such as
Windows XP), a “new hardware” message (Fig. 2-9) will be briefly
displayed near the taskbar.
Figure 2-9. Message displayed in Windows XP when alpha-SE is initially
connected to computer.
拒绝翻译软件的回答,翻译软件,在线翻译我也会