第3个回答 2010-08-16
Drum Shot Blasting Machine Fault and approach are as follows:
Problem one: the amount is not enough steel shot
Performance: cleaning up a long time, ineffective, inefficient and badly damaged the nursing board.
Approach: add appropriate amount of steel shot (with the volume blasting Clamp motor current to rated current can be).
Problem 2: not Shot gate degrees (orientation does not set window position).
Performance: cleaning up a long time, ineffective, inefficient and badly damaged the nursing board.
Approach: adjust orientation sets, window position,shot blasting machine, let projectile at the bottom of the door cover, door cover about one-third of throwing around (can be wood or Zhike try throwing).
Question three: Drum does not turn
Performance: The cylinder does not turn, wheel is still running, roller wear is very serious depression milled cylinder Road track.
Approach: Check workpiece load capacity, can not exceed the required weight. Check whether within the framework of a foreign body or parts will be jammed roller.
Question 4: Roller Deviation
Performance: Road, rail and raised a gnawing inner roller, Road, rail damage.
Approach: to adjust the top screw roller bearing to drum in the normal state of operation.
Question 5: Dust poor results
Performance: Equipment dust leakage.
Approachshot blasting machine: Check the lower vent dust off the dust cover is complete, check the wind wheel is worn severely.