第1个回答 2010-08-30
From July, 2006 to July, 2010: In precise mold development division assumption high-quality mold project engineer.Is engaged in HP, DELL, ACER, BENQ, expense electronic products mold developments and so on APPLE.
Holds the post of the mold to design group leader the position, 4 year mold designs, the management as well as question processing experiences
1. The special case mold development, namely the new product operates the mold to appraise, opens the mold feasibility with the customer self-criticism product, determines the mold plan, the formulation mold design time.
2. The mold structure and goes against the distribution design, the work mixes, the technical guidance, the project blueprint verification, tries to trace follows up, the formation analyzes and the improvement not good, as well as the customer supposes changes and makes supposes changes and so on.
3. Skilled grasping was mad the auxiliary formation technology, Leng Huore the flow channel technology, shoots the formation technology much, pours the pattern making formation technology, the insert-molding formation technology.Familiar models aspect and so on formation, product technical process and surface treatment knowledge.
4. The success has developed multi-special case mold designs and so on computer monitor, printer and LED desk lamp. Myself work obtained the department manager's high approval and the high praise,
in March, 2005--In June, 2006: Holds an office structural design assistant engineer in Shenzhen Jake Science and technology Limited company, primary cognizance computer engine case structure development and computer engine case kneading board outward appearance design.
In March, 2005--In June, 2006: Holds an office structural design assistant engineer in Shenzhen Jake Science and technology Limited company, primary cognizance computer engine case structure development and computer engine case kneading board outward appearance design.
1 year computer engine case structural design, the engine case kneading board outward appearance design, as well as the experimental mold and the production follows up, not good question processing experience.
1. Computer engine case hardware structure design and improvement, computer engine case kneading board outward appearance design.
2. Follows up the mold development, the experimental mold, confirmed the project model and assembles the project prototype, and follows up the product production and the examination, each kind of not good question which in the processing production process appears and proposes the solution.
3. Technically, has certain designed capacity to the sheet metal and the revertex product.Have the profound understanding to the revertex and the hardware, has certain foundation to the system regulation and the craft.
4. Works conscientiously, was responsible, to obtain the department manager's high praise and the affirmation earnestly.
肯定正确，别忘给分。
第2个回答 2010-08-25
翻译成英文大概是这样子：July 2006-July 2010: Modeling the development
of precision mold design department as a senior engineer. In HP,
DELL, ACER, BENQ, APPLE and other consumer electronic products mold
development. Position as head of mold design, 4 years of mold design,
management and experience of a deal with the problem. Ad hoc
development of mold, that mold assessment of new products, mold
products and customers to review the feasibility of the program to
determine the mold, mold design time to develop . 2. Mold structure
and the top of the arrangement of design, work allocation, technical
guidance, engineering drawing review, try touching up, forming bad
analysis and improvement, and customer design changes and
manufacturing design changes and so on. 3. Familiar with injection
molding techniques, cold or hot runner technology, multi-shot molding
technology, flip-molding technology, insert-molding molding
technology. Familiar with the plastic molding, surface treatment
process and product knowledge. 4. Successfully developed a number of
ad hoc computer monitors, printers and other LED lamp mold design. My
work has been director of the highly recognized and praised, 2005 3
months - June 2006: Jack Technology Co., Ltd. in Shenzhen structural
design office assistant, is responsible for the development and
structure of the computer chassis computer chassis panel design. 1
year structural design of the computer chassis, chassis, panel
design, and test mode and production follow-up, bad experience deal
with the problem. 1. Computer chassis hardware structure design and
improvement, computer case panel design. 2. Follow-up mold
development, test mode, confirm engineering model and prototype
assembly work, and follow up the production and testing, handling the
production process occurs a variety of bad problems and propose
solutions. 3. Technically, on sheet metal parts and plastic products
have a certain design capability. On plastics and metal have a better
understanding of processes and technology are a foundation. 4. Work
hard, serious and responsible, has been head of the praise and
recognition.
如果您满意这份答案，请别忘了给分~谢谢。
第3个回答 2010-08-30
July 2006-July 2010: Modeling the development of precision mold design department as a senior engineer. In HP, DELL, ACER, BENQ, APPLE and other consumer electronic products mold development.
Position as head of mold design, 4 years of mold design, management, and problem handling experience
1. Project the development of mold, that mold assessment of new products, mold products and customers to review the feasibility of the program to determine the mold to develop mold design time.
2. Mold structure and the top of the arrangement of design, work allocation, technical guidance, engineering drawing review, try touching up, forming bad analysis and improvement, and customer design changes and manufacturing design changes and so on.
3. Familiar with injection molding techniques, cold or hot runner technology, multi-shot molding technology, flip-molding technology, insert-molding molding technology. Familiar with the plastic molding, surface treatment process and product knowledge.
4. Successfully developed a number of ad hoc computer monitors, printers and other LED lamp mold design. My work has been director of the highly recognized and praised,
March 2005 - 2006 6 months: Jake Technology Co., Ltd. in Shenzhen structural design office assistant, is responsible for the development and structure of the computer chassis computer chassis panel design.
1 year structural design of the computer chassis, chassis, panel design, and test mode and production follow-up, bad experience deal with the problem.
1. Computer chassis hardware structure design and improvement, computer case panel design.
2. Follow-up mold development, test mode, confirm engineering model and prototype assembly work, and follow up the production and inspection process of production of various undesirable problems arise and propose solutions.
3. Technically, on sheet metal parts and plastic products have a certain design capability. On plastics and metal have a better understanding of processes and technology are a foundation.
4. Work hard, serious and responsible, has been head of the praise and recognition本回答被网友采纳
第4个回答 2010-08-30
July 2006 to 2010 July: in precision plastic mould development as a senior mold design engineer. In the HP, DELL, ACER, BENQ, APPLE etc consumer electronic products mould development.
As a leader, mould design for 4 years mould design, management and treatment experiences
1 the project development, namely mould cavity assessment, new products and customer review product mold cavity, determine the feasibility plan, mold design time.
2 the mould structure and design work, the arrangement, technical guidance and engineering drawings audit, follow up, forming bad touch analysis and improvement of, and customers have become and manufacturing set change etc.
3 master gas-assisted molding technology, cold or hot runner technology, shoot molding technology, inversion, and insert the forming technology molding molding technology. - Familiar with molding, plastic products, processes and surface treatment etc.
4 successfully developed more special computer monitors, printers and LED lamp mould design, etc. I got the job by departments and praise,
March 2005-2006 June: in shenzhen jack technology Co., LTD. For structure design assistant engineer, mainly responsible for computer box structure development and computer case panel design.
1 year computer box structure design, chassis plate appearance design, testing and production and follow-up, bad experience in dealing with problems.
1 the computer hardware structure of the chassis design and improvement, computer case panel design.
2. Follow up the development of the mould, the template and assembling, engineering project, and follow up the prototype production and inspection, production process and solving problem.
3 in technology, on the sheet metal parts and plastic products have certain design ability. Plastic and hardware to have a deep understanding of the process and craft, have certain basis.
4 work conscientiously, responsible, the department of praise and recognition.